10 Best Brad Nailer of 2022 – Reviews By An Expert!

Top 10 Best Brad Nailer: Editor Recommended

The 10 Best Brad Nailer Review:

1. WEN 61721 18-Gauge 3/8-Inch to 2-Inch Pneumatic Brad Nailer

Pneumatic Brad Nailer

Remember when you could build whatever you wanted? Nail nails and fasten fasteners with the WEN 18-Gauge 2-Inch Pneumatic Brad Nailer. Fire 18-gauge brads anywhere from 3/8 to 2 inches in length. Our spring-loaded magazine makes for quick and easy reloads with enough space to hold up to 106 nails.

The lightweight body combined with the rubber-lined handle limit fatigue during long days on the job. Operating pressure ranges from 60 to 115 PSI with the nailer consuming 0.028 CFM of air per nail at 88 PSI. The 1/4-inch NPT air inlet allows for quick connection to your favorite air compressor.

Adjust the firing depth of the nailer with the simple turn of the depth adjustment wheel. Check the number of remaining nails through the gauge window mounted on the side of the magazine. Unlatch the front nose to clear jams quickly and easily.

Adjustable air exhaust lets users direct the pneumatic air output in any direction while the powder-coated finish prevents wear and tear to the nailer’s body. And, because it’s a WEN product, your nailer comes backed by a two-year warranty and a friendly customer help line all to make sure you remember WEN.

Highlighted Features:

  • Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
  • Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting
  • Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine
  • Hassle-free nose latch makes clearing jammed nails quick and easy
  • Nails and case not included. Pneumatic nailer, need air compressor to drive

Buy on Amazon

2. DEWALT 20V MAX* Cordless Brad Nailer Kit

Cordless Brad Nailer Kit

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8-inch to 2-1/8-inch which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose.

Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * – Maximum initial battery voltage (measured without a workload) is 20V. Nominal voltage is 18V.

Highlighted Features:

  • 100% battery power of the cordless brand nailer eliminates need for compressor, hose or costly gas cartridges
  • Brushless motor of 18 gauge brad nailer maximizes runtime and durability
  • Micro nose of the battery brad nailer improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
  • Tool-free depth adjustment for precise countersinking of nails
  • Tool-free jam release to quickly and easily clear nail jams
  • Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
  • Tool-free selectable trigger for sequential or contact actuation modes

Buy on Amazon

3. Makita AF506 2″ Brad Nailer

Makita AF506 2

The Makita 18 Gauge 2-inch Brad Nailer (model AF506), features a durable and compact design with ease-of-use features including a narrow-nose design that makes it ideal for a wide variety of finish applications. The AF506 can operate from 70 to 120 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch, and has a magazine capacity up to 100 nails.

The cast-and-machined nose piece is engineered for precise contact with the workpiece, with a non-marring rubber nose engineered to protect the work surface. Additional features include an ultra-narrow nose design that is ideal for fastening in confined areas, and a convenient “tool-less” depth adjustment dial that can be set for a wide variety of finish applications.

For added convenience, the multi-directional exhaust port rotates 360 degrees to direct exhaust air away from the user. The AF506 is engineered for driving a range of 18 gauge brad nails from 5/8″ to 2″ into hard or soft wood applications and is ideal for trim work, baseboard and crown molding installation, flooring and other woodworking applications.

Highlighted Features:

  • Powerful motor drives a range of 18 gauge brad nails from 5/8″ to 2″ into hard or soft wood applications
  • Aluminum body, magazine and cylinder for strength and durability; weighs only 2. 9 lbs.
  • Narrow nose design allows easy nailing access in confined areas
  • Built-in air duster provides convenient air flow to clear work surface
  • Easy to use “tool-less” depth adjustment dial for a wide variety of finish applications

Buy on Amazon

4. PORTER-CABLE 20V MAX* Cordless Brad Nailer Kit with 1 Battery

Cordless Brad Nailer Kit with 1 Battery

The 20V MAX 18-Gauge Brad Nailer Kit is battery-powered, eliminating the need for a compressor, hose, or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool-free settings to provide increased productivity and user safety.

Highlighted Features:

  • 100% Battery Power Of The Cordless Brand Nailer Eliminates Need For Compressor, Hose Or Costly Gas Cartridges
  • Motor Design Of 18 Gauge Brad Nailer Provides Consistent Firing Power Into Various Materials And Climate Conditions
  • Multiple Tool-Free Settings Of The Battery Brad Nailer Provide Ease Of Use
  • Unit’S Lightweight And Optimal Center Of Graviy Provide User Comfort In Multiple Positions Reducing User Fatigue

Buy on Amazon

5. Metabo HPT Brad Nailer Kit

HPT Brad Nailer Kit

The 2″ 18-Gauge Brad Nailer – NT50AE2 is ideal for trim work, furniture building and other finish applications that require precision and performance that the pro and DIY both require. It accepts finish brad nails from 5/8″ in length up to 2″. With a lightweight economical design, this brad nailer is engineered for the toughest jobs.

Highlighted Features:

  • Accepts 5/8 In. to 2 In. 18-gauge fasteners
  • Selective actuation switch lets the user easily select bump fire or sequential fire modes
  • Only 2.2 lbs, for easy all day use
  • Depth of drive dial allows the user to easily adjust the drive depth for a professional finish
  • No-mar tip on the nose protects the work piece from unintended markings
  • Located on the magazine, alerts the user when nail quantities are low so that blank drives are avoided
  • 360 Degree adjustable exhaust port keeps dust, debris and oil off the finish project
  • Rated Pro Preferred for nailers 2014 – 2020 by Builder and Developer magazine

Buy on Amazon

6. BOSTITCH Brad Nailer Kit

BOSTITCH Brad Nailer Kit

Use this Smart Point 18 Gauge Nailer Kit for cabinetry, upholstery, and paneling. Choose from trigger system and countersinking options that best meet your project needs. Depend on this Smart point 18 Gauge Nailer Kit for efficiency and durability.

Highlighted Features:

  • The electric brad nailer features easy nail placement as a result of a smaller nose compared to current BOSTITCH nailers and no need to compress the contact trip to actuate the tool
  • 18 gauge brad nailer drives 18 GA brad nails from 5/8-inch to 2-1/8-inch length
  • Oil-free operation reduces the risk of oil stains
  • Tool-free jam release mechanism for easy nail removal
  • Dial-A-Depth control for precise countersinking of brad nails
  • Selectable trigger system for sequential or contact operation
  • Other Features: rear air exhaust and belt hook with integrated pencil sharpener
  • Kit Includes: Nailer, 1/4-inch Air Fitting, Carrying Case and Extra No-Mar Tips

Buy on Amazon

7. DEWALT Brad Nailer Kit

DEWALT Brad Nailer Kit

The DEWALT DWP12231 18 Gauge 2 in. Brad Nailer drives 18 Gauge brad nails from 5/8″ to 2″ which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its long life, maintenance-free motor, the DWFP12231 is ready to go to work.

Highlighted Features:

  • Long life maintenance-free motor to keep from staining the work surface
  • Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
  • Tool-free jam release mechanism for easy nail removal
  • Rear exhaust to keep contaminates away from work
  • Drives 18 gauge nails from 5/8 in. to 2 in. length
  • Adjustable belt hook allows the tool to be kept near the user
  • Kit includes: carrying case, and owners manual

Buy on Amazon

8. Ryobi P320 Airstrike 18 Volt One+ Lithium Ion Cordless Brad Nailer

Lithium Ion Cordless Brad Nailer

The Ryobi P320 brad nailer has comparable power to some gas-powered nailers and the convenience of a cordless power tool. Any nailing job you may need to perform around the house, from installing roofing tiles to reinforcing joints, can be accomplished with the P320. On a single charge of a 4 amp hour battery from Ryobi’s One+ system, you can fire up to 700 nails up to 50 millimeters long.

Adjust your depth with an onboard dial so you do not have to worry about fiddling with extra tools. Be sure to see what you are working on with the built-in LED lighting, and keep it handy with the attached belt clip. Get what you need to get done with the P320. It’s built for work, so get to it.

Highlighted Features:

  • Drives up to 1700 nails per charge
  • No compressors, hoses or pricey gas cartridges required. Cordless design offers both convenience and superior performance.
  • Convenient adjustment dial regulates air pressure for optimum results.
  • Low-nail indicator to quickly and easily see when it is time to reload
  • Includes: 18-V ONE AirStrike 18-Gauge Cordless Brad Nailer, Battery sold separately

Buy on Amazon

9. DEWALT 20V MAX* Cordless Brad Nailer

Cordless Brad Nailer

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8-inch to 2-1/8-inch which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose.

Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * – Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18V.

Highlighted Features:

  • 100% battery power of the cordless brand nailer eliminates need for compressor, hose or costly gas cartridges
  • Brushless motor of 18 gauge brad nailer maximizes runtime and durability
  • Micro nose of the battery brad nailer improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
  • Tool-free depth adjustment for precise countersinking of nails
  • Tool-free jam release to quickly and easily clear nail jams
  • Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
  • Tool-free selectable trigger for sequential or contact actuation modes

Buy on Amazon

10. WORKPRO 18-Gauge Pneumatic Brad Nailer

PRODUCTNAME

This 18 GA straight brad nailer designed with durable aluminum body and a ergonomically designed comfort grip handle. This is a Pneumatic Brad Nailer, it needs connect Air Compressor by Air Hose. Working air pressure 75-100 PSI.

Highlighted Features:

  • This straight brad nailer is suitable for 3/8″ – 2″ length 18-Gauge brad nails. Depth adjustment switch provide three different kinds of nail depth modes, precise located the depth of nails
  • Improved magazine release latch to avoid pinching hands when placing nails, more safe then other brad nailer. The quick jam release design can easily clear jammed nails. Note: Please release the connect with the trachea, before opening the lam clearing latch
  • 360 degree adjustable exhaust. Notice: Please make sure that the vent is not towards the user when using
  • This brad nailer can used for woodworking, pet house DIY, wood flooring, picture framing, door or window molding installation and much more

Buy on Amazon

Leave a Comment